All notesAbout

Garden sheds, sleepouts and old timber: borer in outbuildings

Spring · November 2026 · about 5 minutes

There's a particular smell to an old garden shed: dust, two-stroke fuel, a little damp. Somewhere in the pile of recycled weatherboards, the offcuts under the bench or the framing of the sleepout, there may be another resident that you'll only notice by its calling card. It's a scatter of fine, gritty powder below a row of tiny round holes.

Borer is a building problem more often thought about in houses, but outbuildings have much the same ingredients. They are often built from untreated timber, sometimes reclaimed, and they get less maintenance than the house. November to January is a good time to look, because that's when adult beetles emerge.

What you're looking for

New Zealand has several wood-borers, and the most common is the common house borer, Anobium punctatum. A Scion factsheet reproduced by the NZ Farm Forestry Association describes it as the most common insect pest of structural and decorative timber in this country. It affects untreated wood used in framing, cladding, joinery, furniture and flooring (NZ Farm Forestry Association / Scion).

The tell-tale signs are consistent:

Kiwicare's borer guide adds that the native house borer leaves slightly larger holes, around 3 to 4 mm, that the two are hard to tell apart, and that borer tend to attack the softer sapwood, so damage often appears on part of a board and not the rest (Kiwicare). A few holes on the surface can mean more damage inside. Kiwicare also mentions a larger species, the two-toothed borer longhorn, which is less common but whose larvae damage structural heartwood and leave bigger holes. If the holes in your shed are well beyond the pinhead sizes above, that is a different conversation, and one for someone who can identify the beetle.

Seven or so wood-boring species attack building timbers here, according to the same guide, but the approach to a first inspection is the same whichever you have: find the holes, find the dust, and work out how damp the wood is.

Why the shed is a candidate

The life cycle explains the pattern. Females lay small white eggs in cracks, on rough-sawn surfaces or in old exit holes. The eggs hatch in four or five weeks, and the larvae burrow in and feed for years: about three years in kahikatea sapwood and about four in rimu and radiata pine sapwood, according to the Scion factsheet. Adults appear from November to January, live for around four weeks and don't feed.

Three things make an outbuilding a likely home:

  1. Untreated sapwood. Kahikatea is especially vulnerable, followed by rimu and radiata pine. Kiln-dried timber may resist attack for a few years but isn't a reliable substitute for preservative treatment.
  2. Damp and still air. Larvae develop fastest in humid conditions above about 70 per cent. Kiwicare lists dry, ventilated subfloors, fixed leaks and clear vents as the way to cut that humidity. A shed with a leaking roof or a floor that never dries is a better nursery than one that is kept dry.
  3. Old holes. Reused timber may already carry exit holes, which females use for egg-laying.

That last point applies to the stack of recycled boards in the corner. Old wood isn't automatically infested, but it deserves a look before it becomes the frame of a sleepout.

A simple inspection

You don't need special equipment. On a dry day:

If the exit holes appear on painted or finished surfaces, remember that damage is often underestimated. Kiwicare's advice is to inspect the timber thoroughly first.

What to do if you find it

The Scion factsheet is blunt: replacing affected timber with preservative-treated wood is the most effective option. Where that isn't practical, licensed operators can fumigate with methyl bromide or phosphine, though reinfestation can happen once the gas dissipates, so a residual contact insecticide is recommended afterwards. Kiwicare describes a range of products from penetrating oil-based treatments for bare wood to injectable insecticides for flight holes, and stresses that keeping the wood dry is part of any answer.

For a small shed, the realistic choice is often between replacing a few boards and tackling the damp that caused the trouble in the first place. For a sleepout, which is lived in and may be insulated or lined, hidden framing is harder to inspect, and it's worth asking for help. If you are dealing with borer in West Auckland outbuildings and aren't sure how far it extends, a professional inspection is the way to find out before you spend money on materials.

Keeping it from coming back

Sources

Backyard Notebook: seasonal notes on Auckland gardens and sections, written from public sources like DOC, MPI and Auckland Council. General information only.